ANA 9610900 MHz AnalogPBXCordless TelephoneOperating Guide®P:\ana9610e\9610usae.vpMon Aug 30 10:25:43 1999Color profile: DisabledComposite Default sc
About Your ANA 9610Congratulations on your purchase of the Uniden ANA 9610Cordless Telephone. The ANA 9610 is designed and engineered toexacting stand
Important Electrical ConsiderationsWarning:Please do not attempt to unplug any applianceduring an electrical storm.Unplug all electrical appliances wh
Radio InterferenceRadio interference may occasionally cause buzzing and hummingin your cordless Handset, or clicking noises in the Base Unit. Thisinte
ANA 9610 FeaturesSuper Long Range 900MHz Digital2-line, 16-digit LCD DisplayHeadset JackRinger Volume ControlHandset Volume ControlSingle button acces
Installing Your ANA 9610Selecting the Installation LocationSelect a location for the ANA 9610 to avoid excessive heat orhumidity. The Base Unit of you
Connecting the Telephone CordsThe ANA 9610 must be connected to an analog PBX port or astandard analog telephone line.CAUTION:Never install telephone
Tone/Pulse SwitchBe sure the TONE/PULSE switch is in the TONE position.Note: Most systems are Tone dialing. Check with your PBXAdministrator if you ar
IMPORTANT! Route the power cord where it will not create a triphazard, or where it could become chafed and create a fire or otherelectrical hazards.No
Wall InstallationStandard Wall Plate MountingThese Phones are designed to be mounted on a standard AT&T orGTE wall plate. To attach the wall mount
6. Place the Base Unit on the postsof the wall plate and push downuntil it’s firmly seated.7. Plug the AC Adapter into astandard 120V AC wall outlet.N
One Year Limited WarrantyWARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)ELEMENTS OF WARRANTY: Uniden warrants, for one year, to theoriginal retail ow
1. Insert two mounting screws 3inches apart. Allow aboutof an inch between the walland screw heads for mountingthe phone.2. Plug and secure the AC Ada
5. Plug the other end of the shorttelephone cord into a telephonewall jack.6. Plug the AC Adapter into a standard 120V AC wall outlet byfollowing step
3. Place the Charging Unit onthe posts of the wall screwsand push down until it’s firmlyseated.4. Plug the AC Adapter into astandard 120V AC wall outl
Attaching the Belt Clip to the HandsetYou can use the Belt Clip to attach the Handset to your belt or pocketfor convenient portability.1. Snap the tab
4. To remove, simply press theretain clip in toward the BeltClip blade and slide the clip upat the same time. Once theBelt Clip is removedremember to
3. Place the cover and slide thecover up until it latches into theHandset.Charging the Handset Battery PackThe Rechargeable Sealed Lead-Acid Battery P
Charging Spare Battery PacksThe Charger Unit of your ANA 9610 is equipped to charge theSpare Battery Pack with or without the Handset in the front slo
Cleaning the Battery and Charging Unit ContactsTo maintain a good charge, it is important to clean all chargingcontacts on the Handset, Spare Battery
Using Your ANA 9610 HandsetBefore using your ANA 9610, be sure to raise the antenna to thevertical position.Note: Operation of the ANA 9610 is perform
ANA 9610 Handset ControlsCondition Action LCD DisplayHandset Earpiece Volume(During a Call)Pressvolon the front ofthe Handset to select ahigh or low E
Covered under one or more of the following U.S. patents:4,511,761 4,523,058 4,595,795,4,597,1044,797,916 4,803,491 5,157,6865,253,268and other patents
Using the HandsetWhen you pick up the Handsetand presstalk, you will see:After the connection has beenmade between the Handset andBase, you will see:O
Answering a CallWhen you receive a call, the Handsetrings and you’ll see:Handset in the Charging Unit Handset out of Charging UnitPick up the Handset.
Feature ButtonsNote: The exact operation of the Feature Buttons depends on howyour PBX system is configured. Contact your PBXAdministrator for more in
Programming the Feature ButtonsThe Transfer and Conference Keys can be programmed for specialuse, such as causing a “Hook Flash” followed by a special
Function KeysHOLDPress once, you’ll hear a “beep” and the call is placed on hold.Pressholdortalkto resume the call (local hold).XFERPressxfer(Transfer
Using Your ANA 9610 MemoryUse these buttons to operate theANA 9610 MemoryStoring a Number1. Pressmemo. You will hear abeep, and see the message:2. Ent
b. Enter5551234.c. Pressmemo.d. Press12.The Handset beeps. This isconfirmation that you haveprogrammed 5551234 intomemory location 12 andyou see:The p
Dialing with a Stored NumberNote: The following applies when the phone is in Standby Mode, andyou have already established a connection between Handse
c. Pressing thechankey, youwill move down through theMemory (20 to 1). Pressingvolyou will move up throughthe Memory (1 to 20). Pressvolorchanuntil yo
Using Your ANA 9610 Base UnitAlthough most of the ANA 9610 operations are performed at theHandset, there are two operations performed at the Base Unit
PRECAUTIONSBefore you read anything else,please observe the following:WARNING!Uniden America Corporation DOES NOT represent this unit to bewaterproof.
Optional Head Set (EXP9530)The optional Head Set provides a “Hands-Free” Option for theANA 9610. With the Head Set installed, you can use the BeltClip
Optional Backup AC Adapter (EXP9505)The Optional Backup AC Adapter provides protection against losing acall in case of AC Power failure. The Backup Ad
Using an Optional Second 2500-typeAnalog TelephoneAnalog Telephone.A standard 2500-type Desk telephone can be used with theANA 9610. Calls can then be
Typical ApplicationsYou can use the ANA 9610 together with a standard PBX telephoneto give you effective business communications both at your desk and
Optional Accessories and ReplacementPartsFor the following Optional Accessories and Replacement Partscontact your PBX Administrator.38AC Adapter Telep
TroubleshootingIf your ANA 9610 Cordless Telephone is not performing to yourexpectations, please try these simple steps. If you are still unable tores
SpecificationsGeneral: The ANA 9610 complies with FCC and IC parts 15 and68.Frequency Control : Phase Lock LoopModulation : FMOperating Temperature :
Handset Controls & Functions1. Ringer ON/OFF switch2. Message Display3. Transfer (xfer) Key4. Hold (hold) Key5. Redial (redial) Key6. Pause (pause
Base Unit Controls & FunctionsTonePulseTone/Pulse slide SwitchstatusIndicatorpage/findKeyholdKeyP:\ana9610e\9610usae.vpMon Aug 30 10:25:48 1999Col
Uniden® is a registered trademark of Uniden America Corporation.AutoStandby™ and AutoTalk™ are trademarks of Uniden America Corporation.AutoStandby is
Important Safety InstructionsWhen using your telephone equipment, basic safety precautionsshould always be followed to reduce the risk of fire, electr
D. If the product does not operate normally when following theoperating instructions. Adjust only those controls that arecovered by the operating inst
Kommentare zu diesen Handbüchern