Uniden UBC785XLT Spezifikationen PDF herunterladen (Seite 44)

Remote Interface

You can communicate and program your UBC785XLT in numerous ways with peripheral

devices using the Remote Interface Cable port (the serial cable is optional). This radio offers

the following modes:

❖ PC Control mode

Program and control your scanner from a PC using optional ARC785 software.

❖ Clone mode

Clone all the frequencies into your scanner to another UBC785XLT.

PC Control Mode

To connect Scanner to PC:

Plug the scanner end of the RS232C straight cable into the remote port which is on the rear

of the scanner. Plug the other end of the cable (DB-9 serial connector) into a personal

computer’s serial port. A few PC’s may require an adapter, most will not. Of course, make

sure your PC is turned ON.

To program your scanner:

You can program and control your scanner remotely from a PC using optional ARC785

software.

After connecting the scanner to a PC, turn the scanner ON.

To use the Remote (PC Control) mode, you must install optional ARC785 software and use

as directed. Make sure that your scanner is connected to the serial port of the PC using the

RS232C straight cable.

UB343ZH_UBC785XLT_OM_0622 6/22/06 3:01 PM Page 40

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 59 60

Keine Kommentare

Uniden UBC785XLT Spezifikationen Seite 44