Uniden PC787 Bedienungshandbuch

Owner’s ManualPrinted in VietnamU01UT393ZZZ(0)®PC787Downloaded from www.cbradio.nl

10caution must be taken to prevent a short circuit. If in doubt, contact your vehicle dealer for information. Ground Information This transceiver may

11• Turn SQ knob fully counterclockwise until you hear a hiss. Everything gets through - noise, weak signals, and strong signals• Turn SQ knob clock

127. Repeat the steps for channel 1 and channel 40 to complete calibration.The readings will be slightly higher for channel 1 and channel 40 than for

13MAINTENANCE The PC787 is designed to give you years of trouble-free service. There are no user-serviceable parts inside. Except for the fuse in the

14If you do not get satisfactory results after performing these checks, call the Uniden Customer Service Center at 1-800-297-1023, 8:00 a.m. to 5:00 p

15TRANSMITTER (Cont’d)Emission Type: 6A3Hum and Noise: Better than 40 dBFrequency Tolerance: ±0.002%Modulation Percentage (Peak): 100%Spurious Reject

16Code Meaning Code Meaning10-4 OK, message received 10-37 Wrecker needed at 10-5 Relay message 10-38 Ambulance needed at 10-6 Busy, stand by 10-39

17Code Meaning Code Meaning10-33 EMERGENCY TRAFFIC 10-200 Police needed at FCC PART 15 INFORMATIONThis device complies with part 15 of the FCC rules.

18Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to y

CONTENTSSAFETY NOTICE ... 4UNPACKING ...

© 2013 Uniden America CorporationUniden is a registered trademark of Uniden America Corporation.Bearcat is a registered trademark of Uniden America Co

4SAFETY NOTICEThe antenna used for this radio must be properly installed and maintained and must provide a separation distance of at least 34 cm (13.4

5DESCRIPTION Your PC787 represents the highest quality communications device designed for use in the Citizens Band Radio Service. It will operate on a

6EMERGENCY OPERATION 1. Move the 9/19/NORM switch to 9; the radio automatically tunes to Channel 9 and disables the channel selector. 2. Press and h

7Do not use the PA function unless an external speaker is connected. 4. NB+ANL/ANL/OFF switch: Activates the Noise Blanker (NB) and Automatic Noise L

817 18 1920212217. Antenna socket: Connects antenna to the unit.18. PA SP: Connects optional external 8-ohm, over 5-watt speaker for use as a public

9Mobile AntennaWARNING! The antenna used for this radio must be installed at least 13.4 inches (34 cm) away from all persons. The antenna must not be