Uniden UDW10055 Bedienungsanleitung PDF herunterladen (Seite 19)

Unstable or Weak Signal

If the video seems to lag and or the audio sounds weak, the camera and the receiver do not have a

strong, clear signal between them. There are several causes for a weak signal:

Possible Cause Solution

The camera might be too

far from the receiver.

- Adjust the antennas on the receiver and the camera. Often, changing

the angle of the antenna can improve the signal strength.

- Try moving the camera closer to the receiver.

The battery in the receiver

may be low.

Make sure the battery in the receiver is fully charged.

There may be too many

obstacles between the

camera and receiver.

- Adjust the antennas on the receiver and the camera.

- Remove as many obstacles from the signal path as possible,

especially any large metal objects that might reflect the signal.

- Avoid placing the camera and receiver where the signal path crosses

a high-traffic area or body of water. For example, place the camera

on the same side of a hallway as the receiver or mount the camera at

least 7 feet up.

- Relocate the camera and receiver so that there is a clear line of sight

between them.

- Try moving the camera closer to the receiver.

Weak signal and video performance

The video performance is directly affected by the signal quality. As the signal weakens degrades,

the amount of data transferred decreases, and the video frame rate goes down. The table below

shows a breakdown of the performance you can expect at the different levels of signal quality.

Signal Level Icon

Data Rate (kbps)

Frames per second (approx)

QVGA (Zoom) VGA (Normal)

Strong

1062~1280 15~20 5~10

Good

725~1062 12~16 3~5

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26

Keine Kommentare

Uniden UDW10055 Bedienungsanleitung Seite 19