Uniden 2.4 Bedienungshandbuch PDF herunterladen (Seite 4)

B. Install the rechargeable battery pack into the handset

C. Connect the base unit and charge the handset

The handset is powered by a rechargeable battery pack. The battery recharges

automatically when the handset is placed in the base unit.

1. Press down on the handset battery case cover

(use the finger indention for a better grip) and

slide the cover downward to remove.

2. Plug the battery pack connector (red & black wires) into

the jack inside the battery compartment (the connector

notches fit into the grooves of the jack only one way).

Match the wire colours to the polarity label in the battery

compartment, connect the battery and listen for a click

to insure connection.

3. Before replacing the battery cover, pull on the battery

wires slightly. If the connection is secure, the jack will

stay in place. Then place the battery case cover back on

the handset by sliding it upwards until it clicks into place.

1. Connect the AC adaptor to the jack

and a standard wall outlet.

2. Set the base unit on a desk or tabletop, and

place the handset in the base unit with the

keypad facing forward.

3. Make sure the LED illuminates.

If the LED does not illuminate, check to see that the

AC adaptor is plugged in and the handset makes

good contact with the base charging contacts.

4. Charge your handset at least

NOTE:

NOTE: For optimum performance, use only the Uniden

battery (BT- 905) supplied with your phone.

charge/in use

NOTICE:

NOTE: • Use only the supplied AAD-210 AC adaptor.

Do not use any other AC adaptor.

If your home has specially wired alarm equipment

connected to the telephone line, be sure that

installing the system does not disable your alarm

equipment. If you have questions about what will

disable your alarm equipment, contact your

telephone company or a qualified installer.

Do not place the power cord where it creates

a trip hazard or where it could become chafed and

create a fire or electrical hazard.

• Connect the AC adaptor to a continuous power supply.

• Place the base unit close to the AC outlet to avoid long extension cords.

DC IN 9V

240V AC

15-20 hours before plugging the phone line.

When fully charged the battery will provide up to 7hrs talk time and 14

days standby time.

[3]

R oute the cor d.

1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Uniden 2.4 Bedienungshandbuch Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Telefone Uniden 2.4