2 - English
GETTING STARTED
Installing Your Phone
Charge the Baery
1. Unpack the handset, battery pack, and battery cover. If you need to remove the cover, press in on the notch and slide the
cover down and off.
2. Line up the battery connector with the jack inside the handset; the connector only fits one way.
3. Push the connector in until it clicks into place; tug gently on the wires to make sure the battery pack is securely connected.
4. Replace the battery cover and slide it into place.
5. Use the AC adapter to connect the power jack on the base to a regular indoor (120V AC) power outlet.
6. Place the handset in the base with the display facing forward. If the display doesn’t light up, reseat the handset or connect
the base to a different outlet.
# Charge the handset completely (about 15 hours) before using.
Connect the Telephone Cord
Use the telephone cord to connect the
TEL LINE
jack on the base to a standard telephone wall jack.
# If the display says Check Tel Line, check the connection between the base and the phone jack.
Test the Connecon
Make a quick test call. Pick up the handset and press
TaLk/fLash
. (Press
ENd
to hang up.)
x If there’s a lot of noise, check for interference (see p. 6).
x If you keep hearing a dial tone, change to pulse dialing (see below).
Changing from Tone to Pulse Dialing
Your phone uses tone dialing by default. If your phone company uses pulse dialing, you need to change your phone’s dial mode.
1. Press
MENu/sELEcT
and select Global Setup.
2. Select Dial Mode then Pulse. You’ll hear a confirmation tone.
To send DTMF tones during a call (e.g., for an automated response system), press
*
to temporarily switch to tone dialing. When
you hang up, the phone automatically returns to pulse dialing.
Geng to Know Your Phone
Base
Key What it does
fINd
In standby: page the handset.
Handset
Key (icon) What it does Key (icon) What it does
caLLEr Id/
rIGhT
x In standby or during a call: open the CID list.
x In any menu or list: go to the next screen.
ENd
x During a call: hang up.
x In any menu or list: exit and go to standby.
MEssaGE/
MuTE/cLEar
(
)
x In standby: access your voice mail service.
x During a call: mute the microphone.
x While the phone is ringing: ignore this call (mute
the ringer).
x When entering text or numbers: erase the
character at the cursor (press and hold to erase
all characters).
rEdIaL/
pausE
x In standby: open the redial list.
x While entering a phone number: insert a
2-second pause.
Earpiece
Display
Status
PHONEBOOK/
LEFT
CALLER ID/
RIGHT
UP/DOWN
Microphone
12-key dial pad
MESSAGE/
MUTE/CLEAR
END
TALK/
FLASH
MENU/
SELECT
REDIAL/
PAUSE
Charging
contacts
FIND
(84 Seiten)
(12 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern